Several Compilation Errors when compiling MCUBoot for 'nucleo_u575zi_q' board with 'CONFIG_MCUBOOT_SERIAL=y'

[Nick-Chiptech]

Attempting to build MCUBoot for the first time (newish to Zephyr and MCUBoot) but I seem to have genuine compile errors. This is my PRJ.conf.
Im just using the MCUBoot that ships with the latest Zephyr 4.3. When I enabled 'CONFIG_MCUBOOT_SERIAL=y' the errors occur.

zephyr : v4.3.0-1013-g8c264d30ea1
mcuboot : v2.2.0-221-gf3cc9476
zephyr-sdk-0.17.4

==================================================
prj.conf

CONFIG_PM=n

CONFIG_MAIN_STACK_SIZE=10240

CONFIG_BOOT_SWAP_SAVE_ENCTLV=n

#NRP EDIT
CONFIG_BOOT_ENCRYPT_IMAGE=y
CONFIG_BOOT_VALIDATE_SLOT0=y
CONFIG_BOOT_SIGNATURE_TYPE_RSA=y
CONFIG_BOOT_ENCRYPTION_KEY_FILE="enc-rsa2048-priv.pem"
CONFIG_BOOT_SIGNATURE_KEY_FILE="root-rsa-2048.pem"
CONFIG_NO_OPTIMIZATIONS=n #75kB bigger if yes!
CONFIG_BOOT_UPGRADE_ONLY=n
CONFIG_BOOT_BOOTSTRAP=y

Enable logging for MCUboot

CONFIG_LOG=y
CONFIG_MCUBOOT_LOG_LEVEL_WRN=y
CONFIG_UART_CONSOLE=n # Disable UART, since Serial Recovery uses it
CONFIG_MCUBOOT_SERIAL=y # Enable Serial Recovery over UART
CONFIG_SINGLE_APPLICATION_SLOT=n # Configure the bootloader to use two slots
CONFIG_MCUBOOT_INDICATION_LED=y # Turn on a LED so we can see when Serial Recovery mode is active

CONFIG_FLASH=y
#CONFIG_MCUMGR=y
#CONFIG_NET_BUF=n
#wait before jumping to app
#CONFIG_BOOT_SERIAL_WAIT_FOR_DFU=y
#CONFIG_BOOT_SERIAL_WAIT_FOR_DFU_TIMEOUT=2000

Various Zephyr boards enable features that we don't want.

CONFIG_BT is not set

CONFIG_I2C is not set

CONFIG_LOG_MODE_MINIMAL=y

Ensure Zephyr logging changes don't use more resources

CONFIG_LOG_DEFAULT_LEVEL=0

Use info log level by default

CONFIG_MCUBOOT_LOG_LEVEL_DBG=y

Decrease footprint by ~4 KB in comparison to CBPRINTF_COMPLETE=y

CONFIG_CBPRINTF_NANO=y

Use picolibc to reduce flash usage

CONFIG_PICOLIBC=y

Disable malloc arena because we don't need it

CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE=0

==================================================
errors

C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c:114:31: warning: 'struct enc_data' declared inside parameter list will not be visible outside of this definition or declaration
114 | decrypt_region_inplace(struct enc_data *enc_data,
| ^~~~~~~~
C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c: In function 'decrypt_region_inplace':
C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c:169:30: warning: passing argument 1 of 'boot_enc_decrypt' from incompatible pointer type [-Wincompatible-pointer-types]
169 | boot_enc_decrypt(enc_data,
| ^~~~~~~~
| |
| struct enc_data *
In file included from c:\code\zephyr\bootloader\mcuboot\boot\bootutil\src\bootutil_priv.h:44,
from C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c:10:
C:/Code/zephyr/bootloader/mcuboot/boot/bootutil/include/bootutil/enc_key.h:73:44: note: expected 'struct enc_key_data *' but argument is of type 'struct enc_data *'
73 | void boot_enc_decrypt(struct enc_key_data *enc_state,
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~
C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c: In function 'decrypt_image_inplace':
C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c:265:37: error: incompatible type for argument 1 of 'decrypt_region_inplace'
265 | rc = decrypt_region_inplace(enc_data, fa_p, hdr, size, sect_size);
| ^~~~~~~~
| |
| struct enc_key_data
C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c:114:41: note: expected 'struct enc_data *' but argument is of type 'struct enc_key_data'
114 | decrypt_region_inplace(struct enc_data *enc_data,
| ~~~~~~~~~~~~~~~~~^~~~~~~~
C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c:274:5: warning: implicit declaration of function 'boot_enc_zeorize'; did you mean 'boot_enc_zeroiz'? [-Wimplicit-function-declaration]
274 | boot_enc_zeorize(&enc_data);
| ^~~~~~~~~~~~~~~~
| boot_enc_zeroize
C:/Code/zephyr/bootloader/mcuboot/boot/boot_serial/src/boot_serial_encryption.c:275:22: warning: passing argument 1 of 'boot_state_clear' from incompatible pointer type [-Wincompatible-pointer-types]
275 | boot_state_clear(&state);
| ^~~~~~
| |
| struct boot_loader_state **
In file included from c:\code\zephyr\bootloader\mcuboot\boot\bootutil\src\bootutil_priv.h:37:
C:/Code/zephyr/bootloader/mcuboot/boot/bootutil/include/bootutil/bootutil.h:89:49: note: expected 'struct boot_loader_state *' but argument is of type 'struct boot_loader_state *'
89 | void boot_state_clear(struct boot_loader_state *state);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~
[127/308] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/cbprintf_nano.c.obj
ninja: build stopped: subcommand failed.
FATAL ERROR: command exited with status 1: 'C:\Program Files\CMake\bin\cmake.EXE' --build 'c:\Code\zephyr\bootloader\mcuboot\boot\zephyr\build'